The length of the Camco RV Step Cover part # CAM42935 that you referenced is 21-1/2 inches and fits most standard RV step dimensions. view full answer...
The box that covers the struts on the MORryde StepAbove RV Steps # MR75RR measures 4" wide x 6" deep x 14.25" tall which you can see in the attached diagram.
Attached is a review video for you to check out. view full answer...
The Surco RV Bunk Ladder # SP503B has rungs that measure 12-3/4 inches long with 10 inches in between the tubes and 2 inches wide but with the plastic covers 2-1/4 inches. There is 12 inches between the rungs. view full answer...
The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" Wide RV Door Frames - Triple - Aluminum
# LC791572 has a travel height of 56-1/4 inches. So to get the outside dimension you will subtract your threshold tread plate and plus the hinge plate. view full answer...
I have the measurements of the Kwikee Electric RV Step Complete Assembly # LC3726892 you are looking for.
From the top of the top of the mounting bracket to the bottom of the bottom step is 17-3/8", from the top step to the top of mounting bracket is 7.13", when full extended the overall depth from the back of the mounting step to the front of the bottom step is 33-5/8".
I included a diagram of all of the measurements of the Kwikee Electric RV Step # LC3726892 for you to take a look at. view full answer...
The side mounting bolt holes measure 7 inches apart on center for the Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide # LC432682.
From the bottom of the bracket to the bolt holes it is 9 inches, or from the top to the bolt holes it is 3/4 of an inch. If needed, you can also install them using Lippert Outriggers for Manual RV Steps # LC301704. And for mounting hardware use Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72. view full answer...
You can see our range of 6-step RV step assemblies on the linked page. We have none with 7 or 8 steps.
All of these feature aluminum construction for reduced weight. You have options with either 6-inch-deep or 8-inch-deep steps. Each item will have a shipping weight shown (above the 'add to cart' button) so you can deduct about 5-lbs for the packaging/carton to estimate the actual weight of the step assembly.
Please note that none of these will reach up to the 7-foot height since RVs... view full answer...
Yes, we do. I checked with Lippert and the correct replacement steps for the part number 902508000 you gave me are the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps item # LC369552.
We also have the Kwikee Electric RV Step Complete Assembly item # LC3658373 which includes the switch that allows you to override the automatic retraction of the steps.
I have linked an installation video below. view full answer...
All of our replacement RV electric step assemblies will tend to be at a similar height since they must provide enough ground clearance when retracted to allow for safe travel. When extended their height depends on how many steps the unit has and the nature of the RV itself.
If you existing RV steps work okay but are just too high up you might be better offer simply using a separate stationary step to give you a boost to get up to that first step pad. The Safety Step adjustable step # SASXLA-09C-G... view full answer...
There really isn't a set ground clearance, the underside of the housing will sit 14-1/2 inches lower than the top of the mounting flanges as shown in the provided photo. If you measure 14-1/2 inches downward from where you'll mount the steps, you'll know exactly where the underside of the steps will sit in relation to everything else on the RV undercarriage.
I've linked to a product description video featuring the # SMFP-3100 RV Steps. view full answer...
With the Convert-A-Ball Step Gate # CAB-SG removed using the quick release there still will be a portion of the assembly that will go over the top of the tail gate.
To get an idea of what will still be on the tail gate check out the picture I attached.
This additional bracket that will go over the tail gate may or may not interfere with your roll-up truck bed cover. I would think that you would be okay, but you will want to check out the pic and compare it to your setup to see if you... view full answer...
The Manual Pull-Out Step for RVs - Double # LC432682 has mounting holes that are about 24" x 7" and although there are not any with a 14" x 7" pattern, you can still use this step. In order to do so you have a couple of choices. The first would be to weld the steps onto your RV while the other option would be to use Lippert Outriggers for Manual RV Steps # LC301704. You would need Mounting Hardware # LC118155-72 to attach the steps to the Outriggers. view full answer...
Each one of the steps on the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear (4-step) # TLA8004 is 8 inches deep. So for 4 steps, it would extend approximately 32". The reason I say approximately is because this is a scissor step which means that the higher the vertical distance the steps come down the further out they will go as they extend.
The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear (3 step) # TLA8003 would extend approximately 24". view full answer...
When the Lippert Step part # LC3726892 is installed and extended completely the overall height would be 17-1/4 inches from where it mounts to the RV down to bottom of lower step. view full answer...
Yes, we do. We've got three options depending on the height of your entryway. I have listed them below:
2 Steps - MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways item # MR86RR. This will work with entry heights of 25" - 29" from the ground up to the threshold.
3 Steps - MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways item # MR58RR. This will work with entry heights that are 30" - 33-1/2" from the ground up to the threshold.
3 Steps - MORryde StepAbove... view full answer...
The bolt, or fastener screws, that come with the Replacement Hardware and Backer Plate for Lippert SolidStep Manual RV Steps # LC702580 are 10-24 x 4". This hardware is designed for Lippert SolidStep manual RV steps. view full answer...
The MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 3 Steps # MR78RR weighs 59 pounds.
It has a drop and rise of 9 inches and a weight capacity of 500 pounds.
It fits a threshold-to-ground height between 34" and 36" inches. view full answer...
Go To Results